Toyota 2007 Highlander Owner'S Manual Download Page 398

Page: 398 / 439

’07 HIGHLANDER_U (L/O 0608)

374

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Be extremely cautious when work-
ing on the battery. It contains poi-

sonous and corrosive sulfuric acid.

NOTICE

Remember that battery and ignition
cable carry high currents or volt-

ages. Be careful of accidentally

causing a short circuit.

Add only “Toyota Super Long Life

Coolant” or similar high quality eth-

ylene glycol based non

−

silicate,

non

−

amine, non

−

nitrite, and non

−

bo-

rate coolant with long

−

life hybrid

organic acid technology to fill the
radiator. “Toyota Super Long Life

Coolant” is a mixture of 50% cool-

ant and 50% deionized water (for
the U.S.A.) or 55% coolant and 45%

deionized water (for Canada).

If you spill some of the coolant, be

sure to wash it off with water to

prevent it from damaging the parts
or paint.

Do not allow dirt or anything else
to fall through the spark plug holes.

Use only spark plugs of the speci-
fied type. Using other types will

cause engine damage, loss of per-

formance or radio noise.

Do not reuse iridium

−

tipped spark

plugs by cleaning or regapping.

Do not overfill automatic transmis-

sion fluid and power steering fluid,

or the transmission and power
steering could be damaged.

Do not drive with the air cleaner

filter removed, or excessive engine
wear could result. Also backfiring

could cause a fire in the engine
compartment.

Be careful not to scratch the glass

surface with the wiper frame.

When closing the engine hood,

check to see that you have not for-
gotten any tools, rags, etc.

Front

Rear (two

−

wheel drive models)

Positioning the jack

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands