Toyota 2007 Highlander Owner'S Manual Download Page 157

Page: 157 / 439

’07 HIGHLANDER_U (L/O 0608)

133

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

If the indicator or buzzer comes on...

Do this.

(a)

(indicator and buzzer)

If parking brake is off, stop immediately and contact Toyota dealer.

(b)

(indicator and buzzer)

Fasten driver’s seat belt.

(c)

Fasten front passenger’s seat belt.

(d)

Stop immediately and contact Toyota dealer.

(e)

Stop and check.

(f)

Take vehicle to Toyota dealer.

(g)

Low fuel level warning light

Fill up tank.

Service reminder indicators and warning buzzers

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands