Toyota 2007 Highlander Owner'S Manual Download Page 124

Page: 124 / 439

’07 HIGHLANDER_U (L/O 0608)

100

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

3. While pressing the convertible seat

firmly against the seat cushion and
seatback, let the shoulder belt retract

as far as it will go to hold the convert-

ible seat securely.

CAUTION

Push and pull the child restraint sys-
tem in different directions to be sure

it is secure. Follow all the installation

instructions provided by its manufac-
turer.

4. To remove the convertible seat, press

the buckle release button and allow the
belt to retract completely. The belt will

move freely again and be ready to

work for an adult or older child passen-
ger.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands