Toyota 2007 Highlander Owner'S Manual Download Page 72

Page: 72 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

CAUTION

When returning the seatback to the
upright position, observe the follow-

ing precautions in order to prevent

death or serious injury in a collision
or sudden stop:

Make sure the seatback is securely

locked by pushing forward and rear-
ward on the top of the seatback.

Failure to do so will prevent the

seat belt from operating properly.

Make sure the seat belts are not

twisted or caught in the seatback
and are arranged in their proper

position and are ready to use.

From front

From rear

1. SEATBACK

ANGLE

ADJUSTING

STRAP

Lean forward and pull the strap toward
you. Then lean back to the desired

angle and release the strap.

2. SEATBACK

ANGLE

ADJUSTING

LEVER

Pull down the lever, then adjust the
seatback to the desired angle and re-

lease the lever.

CAUTION

Do not adjust the seat while the
vehicle is moving.

Be careful that the seat does not

hit a passenger or luggage.

—Adjusting third seat

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands