Toyota 2007 Highlander Owner'S Manual Download Page 67

Page: 67 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Vehicles with third seat

Vehicles without third seat

1. SEAT POSITION ADJUSTING LEVER

Hold the center of the lever and pull it

up. Then slide the seat to the desired
position with slight body pressure and

release the lever.

2. SEATBACK

ANGLE

ADJUSTING

LEVER

Pull the lever up. Then lean back to the
desired angle and release the lever.

CAUTION

Do not adjust the seat while the
vehicle is moving.

Be careful that the seat does not

hit a passenger or luggage.

—Adjusting second seats

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands