Toyota 2007 Highlander Owner'S Manual Download Page 213

Page: 213 / 439

’07 HIGHLANDER_U (L/O 0608)

189

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

NOTICE

Benzene or alkaline solutions may
damage the coated surface of the

screen

To prevent the battery from being
discharged, do not turn on the rear

seat entertainment system longer

than necessary when the engine is
not running.

The rear seat entertainment system can

be operated with the rear seat entertain-

ment system controller and buttons on the
DVD player unit. The system cannot be

operated by touching the switches on the

screen directly.

CAUTION

Do not disassemble or modify the
controller. It may cause an accident,

fire or electric shock.

NOTICE

Keep the controller away from direct
sunlight, high heat and high humidity.

These conditions could cause the

case to deform or the battery to ex-
plode or leak.

BEFORE USING THE CONTROLLER

(for  new  vehicle  owners)
A  battery  is  already  set  in  the  control-
ler  with  an  insulating  sheet,  which  pre-

vents the battery from being dis-

charged. Before using the controller,
remove the insulating sheet according

to the following procedure.

—Rear seat entertainment

system controller

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands