Toyota 2007 Highlander Owner'S Manual Download Page 90

Page: 90 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

The front passenger’s seat belt pretension-

er will not activate if no passenger is

detected in the front passenger seat by
the front passenger occupant classification

system. However, the front passenger’s

seat belt pretensioner may activate if lug-
gage is put on the seat, or the seat belt

is buckled up regardless of the presence

of an occupant in the seat. (As for the
front passenger occupant classification

system, see “—Front passenger occupant

classification system” on page 85 in this
Section.)
The seat belt pretensioners and SRS air-

bags may not operate together in all colli-
sions.

The seat belt pretensioner system con-

sists mainly of the following components
and their locations are shown in the il-

lustration.

1. Front  airbag  sensors
2. SRS  warning  light
3. Front  passenger  occupant  classification

system (ECU and sensors)

4. Seat belt pretensioner assemblies
5. Front passenger’s seat belt buckle

switch

6. Airbag sensor assembly

The seat belt pretensioners are controlled

by the airbag sensor assembly. The airbag

sensor  assembly  consists  of  a  safing  sen-
sor  and  airbag  sensor.
When  the  seat  belt  pretensioners  are  acti-

vated, an operating noise may be heard
and a small amount of non

−

toxic gas may

be released. This does not indicate that

a  fire  is  occurring.  This  gas  is  normally
harmless.
Once  the  seat  belt  pretensioners  have
been  activated,  the  seat  belt  retractors

remain locked.

CAUTION

Do not modify, remove, strike or open
the seat belt pretensioner assemblies,

airbag sensor or surrounding area or

wiring. Failure to follow these instruc-
tions may prevent the seat belt pre-

tensioners from activating correctly,

cause sudden operation of the system
or disable the system, which could

result in death or serious injury. Con-

sult your Toyota dealer about any re-
pair and modification.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands