Toyota 2007 Highlander Owner'S Manual Download Page 272

Page: 272 / 439

’07 HIGHLANDER_U (L/O 0608)

248

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

If following another vehicle on a dusty

road, or driving in windy and dusty

conditions, it is recommended that the
air intake selector be temporarily set to

RECIRCULATE, which will close off the

outside passage and prevent outside
air and dust from entering the vehicle

interior.

Heating

For best results, set controls to:

Fan speed—

Any setting except “OFF”

Temperature—

Towards

WARM

(red zone)

Air intake—FRESH

(outside air)

Air flow—FLOOR

Air conditioning—OFF

For quick heating, select recirculated

air for a few minutes. To keep the
windows from fogging, select fresh af-

ter the vehicle interior has been
warmed.

Press the “A/C” button on for dehumidi-

fied heating.

Choose floor/windshield air flow to heat

the vehicle interior while defrosting or
defogging the windshield.

Air conditioning

For best results, set controls to:

Fan speed—

Any setting except “OFF”

Temperature—

Towards

COLD

(blue zone)

Air intake—FRESH

(outside air)

Air flow—PANEL

Air conditioning—ON

For quick cooling, turning the tempera-

ture selector knob fully towards COLD

changes the air intake selector mode
to RECIRCULATE.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands