Toyota 2007 Highlander Owner'S Manual Download Page 74

Page: 74 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

2. To stow the third seat seat belt, first

insert tab 1 into the slot and then
insert tab 2 into the slot. Make sure

the tabs are securely locked in the

slot.

NOTICE

The seat belt must be stowed before
you fold the seatback.

From front

From rear

FOLDING DOWN THIRD SEAT
Lower the head restraints to the lowest

position. Pull the seatback angle adjust-
ing strap toward you or pull down the

seatback angle adjusting lever to un-

lock the seatback and fold the seatback
down until it locks.

CAUTION

Be careful that the seat does not hit
a passenger or luggage.

Folding down the third seat will enlarge

the luggage compartment. See “—Stowage

precautions” on page 311 in Section 2 for
precautions when loading luggage.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands