Toyota 2007 Highlander Owner'S Manual Download Page 121

Page: 121 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

CAUTION

Never install a rear

−

facing child re-

straint system on the front passen-

ger seat. A forward

−

facing child re-

straint system should only be
installed on the front passenger

seat when unavoidable. If you must

install the child restraint system on
the front passenger seat, put the

seat in its most rearward position,

and install the forward

−

facing child

restraint system in the proper or-

der. Otherwise, the front passenger

occupant classification system can
not detect the presence of the child

restraint system and the front pas-

senger airbag and side airbag on
the front passenger seat could

deploy, and the impact could cause

death or serious injury to the child.

Never install a rear

−

facing child re-

straint system on the front passen-

ger seat even if the “AIRBAG OFF”

indicator light is illuminated. In the
event of an accident, the impact of

the rapid inflation of the front pas-

senger airbag could cause death or
serious injury to the child if the

rear

−

facing child restraint system is

installed on the front passenger
seat.

Move seat

fully back

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.

Always move the seat as far back

as possible even if the “AIRBAG

OFF” indicator light is illuminated,

because the front passenger airbag

could

inflate with considerable

speed and force. Otherwise, the

child may be killed or seriously in-

jured.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands