Toyota 2007 Highlander Owner'S Manual Download Page 125

Page: 125 / 439

’07 HIGHLANDER_U (L/O 0608)

101

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

−

facing position only.

Move seat

fully back

CAUTION

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.
Always move the seat as far back

as possible even if the “AIRBAG

OFF” indicator light is illuminated,
because the front passenger airbag

could

inflate with considerable

speed and force. Otherwise, the
child may be killed or seriously in-

jured.

Do not allow the child to lean his/
her head or any part of his/her

body against the door or the area

of the seat, front or rear pillar or
roof side rail from which the side

airbags or curtain shield airbags

deploy even if the child is seated in
the child restraint system. It is dan-

gerous if the side airbag and/or

curtain shield airbag inflate, and the
impact could cause death or seri-

ous injury to the child.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands