Toyota 2007 Highlander Owner'S Manual Download Page 322

Page: 322 / 439

’07 HIGHLANDER_U (L/O 0608)

298

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

“ABS” warning light

The light comes on when the ignition key

is turned to the “ON” position. If the anti

−

lock brake system and the brake assist

system work properly, the light turns off

after a few seconds. Thereafter, if the
system malfunctions, the light comes on

again.
When the “ABS” warning light is on (and

the brake system warning light is off), the

anti

−

lock brake system, the brake assist

system, the traction control system and

the vehicle stability control system do not

operate,  but  the  brake  system  still  oper-
ates  conventionally.
When  the  “ABS”  warning  light  is  on  (and

the brake system warning light is off), the
anti

−

lock brake system does not operate

so that the wheels could lock up during
a sudden braking or braking on slippery

road surfaces.

If either of the following conditions
occurs, this indicates a malfunction

somewhere in the components moni-

tored by the warning light system. Con-
tact your Toyota dealer as soon as

possible to service the vehicle.

The light does not come on when the

ignition key is turned to the “ON” posi-

tion, or remains on.

The light comes on while you are driv-

ing.

A warning light turning on briefly during
operation does not indicate a problem.

CAUTION

If the “ABS” warning light remains on
together with the brake system warn-

ing light, immediately stop your ve-

hicle  at  a  safe  place  and  contact  your
Toyota  dealer.
In  this  case,  not  only  the  anti

−

lock

brake system will fail but also the
vehicle will become extremely unsta-

ble during braking.

DRUM

−

DISC TYPE PARKING BRAKE

SYSTEM

Your vehicle has a drum

−

disc type

parking brake system. This type of brake

system needs bedding

−

down of the brake

shoes periodically or whenever the parking

brake shoes and/or drums are replaced.
Have your Toyota dealer perform the bed-

ding

−

down.

BRAKE ASSIST SYSTEM
If you slam the brakes on such as in

an emergency or apply the brakes more

firmly than usual such as when de-

scending the hill with the designated

number of occupants in the vehicle, the

brake assist system provides more

powerful braking.

If you slam the brakes on or apply the
brakes more firmly, more powerful braking

will be applied. At this time, you may hear
a sound in the engine compartment and

feel the vibrations of the brake pedal. This

does not indicate a malfunction.
The brake assist system becomes opera-

tive after the vehicle has accelerated to

a speed in excess of approximately 10
km/h (6 mph). It stops operating when the

vehicle decelerates to a speed below

approximately 5 km/h (3 mph).
For an explanation of this system’s warn-

ing light, see “Service reminder indicators
and warning buzzers” on page 133 in Sec-

tion 1

−

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands