Toyota 2007 Highlander Owner'S Manual Download Page 216

Page: 216 / 439

’07 HIGHLANDER_U (L/O 0608)

192

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

LOCATING THE CONTROLLER

If you lose sight of the controller, push

and hold the “CURSOR (REMOTE)” button
on the DVD player unit until you hear a

beep. A buzzer sounds from the controller

to let you know where it is.
To stop the buzzer, push any button of the

controller.
If the controller is located close to some-

thing that blocks the signal, such as some

kind of metal, the controller may not re-
ceive the signal and the buzzer may not

sound.

FCC Information

Caution:

Any changes or modifica-

tions in construction of this device

which are not expressly approved by

the party responsible for compliance

could void the user’s authority to op-

erate the equipment.

FCC Label Information

This device complies with part 15 of

the FCC Rules. Operation is subject

to the following two conditions: (1)

This device may not cause harmful

interference, and (2) this device must

accept any interference received, In-

cluding interference that may cause

undesired operation.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands