Toyota 2007 Highlander Owner'S Manual Download Page 212

Page: 212 / 439

’07 HIGHLANDER_U (L/O 0608)

188

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

To open the display, push the lock release

button.

Push down the display until it is locked.

NOTICE

The screen should be cleaned with a
dry soft cloth. If the screen is pushed

by hand or wiped with a hard cloth,

the surface of the screen may be
scratched.

To close, push up the display until you

hear a click.
The illumination of the screen is automati-

cally turned off when the display is
closed. However, the rear seat entertain-

ment system is not turned off.

CAUTION

To reduce the chance of injury in
case of an accident or sudden stop

while driving, close the display when

it is not in use.

—Display

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands