Toyota 2007 Highlander Owner'S Manual Download Page 97

Page: 97 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Do not modify or remove any wir-
ing. Do not modify, remove, strike

or open any components such as

the steering wheel pad, steering
wheel, column cover, dashboard

near the front passenger airbag,

front passenger airbag cover, front
passenger airbag or airbag sensor

assembly. Doing so may prevent the

front airbag system from activating
correctly, cause sudden activation

of the system or disable the sys-

tem, which could result in death or
serious injury.

Failure to follow these instructions
can result in death or serious injury.

Consult your Toyota dealer about any

repair and modification.
If you wish to modify your vehicle for

a person with a physical disability,

consult your Toyota dealer. It may
dangerously interfere with the SRS

front airbags operation.

NOTICE

Do not perform any of the following
changes

without

consulting

your

Toyota dealer. Such changes can

interfere with proper operation of the
SRS front airbag system in some

cases.

Installation of electronic devices
such as a mobile two

−

way radio,

cassette tape player or compact

disc player

Modification of the suspension sys-

tem

Modification of the front end struc-

ture

Attachment of a grille guard (bull

bar, kangaroo bar, etc.), snowplow,

winches or any other equipment to
the front end

Repairs made on or near the front
fenders, front end structure, con-

sole, steering column, steering

wheel or dashboard near the front
passenger airbag

This indicator comes on when the igni-

tion key is turned to the “ON” position.
It goes off after about 6 seconds. This

means the SRS front airbags are oper-

ating properly.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands