Toyota 2007 Highlander Owner'S Manual Download Page 190

Page: 190 / 439

’07 HIGHLANDER_U (L/O 0608)

166

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

CRUISE CONTROL FAILURE WARNING

If the “CRUISE” indicator light flashes

when using the cruise control, press the
“ON

−

OFF” button to turn the system off

and then press it again to turn it on.
If any of the following conditions then oc-

curs, there is some trouble in the cruise

control system.

The indicator light does not come on.

The indicator light flashes again.

The indicator light goes out after it

comes on.

If this is the case, contact your Toyota

dealer and have your vehicle inspected.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands