Toyota 2007 Highlander Owner'S Manual Download Page 117

Page: 117 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Do not install a child restraint sys-
tem on the second (or third) seat if

it interferes with the lock mecha-

nism of the front (or second) seats.
Otherwise, the child or front (or

second) seat occupant(s) may be

killed or seriously injured in case
of sudden braking or a collision.

If the driver’s seat position does

not allow sufficient space for safe
installation, install the child re-

straint system on the right second

seat.

Same angle

Same position

When installing a child restraint
system in the second seat center

position, adjust both seat cushions

to the same position and align both
seatbacks at the same angle. Other-

wise, the child restraint system can-

not be securely restrained and this
may cause death or serious injuries

in a collision.

1. Run the lap and shoulder belt through

or around the infant seat following the
instructions provided by its manufactur-

er and insert the tab into the buckle

taking care not to twist the belt. Keep
the lap portion of the belt tight.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands