Toyota 2007 Highlander Owner'S Manual Download Page 54

Page: 54 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

CAUTION

Keep the back door

closed while driv-

ing. This not only keeps the luggage

from being thrown out but also pre-

vents exhaust gases from entering
the vehicle.

To open the hood:

1. Pull the hood lock release lever. The

hood will spring up slightly.

CAUTION

Before driving, be sure that the hood
is closed and securely locked. Other-

wise, the hood may open unexpected-

ly while driving and an accident may
occur.

2. In front of the vehicle, pull up the

auxiliary catch lever and lift the
hood.

Hood

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands