Toyota 2007 Highlander Owner'S Manual Download Page 119

Page: 119 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

CAUTION

Push and pull the child restraint sys-
tem in different directions to be sure

it is secure. Follow all the installation

instructions provided by its manufac-
turer.

4. To remove the infant seat, press the

buckle release button and allow the
belt to retract completely. The belt will

move freely again and be ready to

work for an adult or older child passen-
ger.

(B) CONVERTIBLE SEAT INSTALLATION
A convertible seat must be used in for-
ward

−

facing or rear

−

facing position de-

pending on the age and size of the
child. When installing, follow the

manufacturer’s instructions about the

applicable age and size of the child as
well as directions for installing the

child restraint system.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands