Toyota 2007 Highlander Owner'S Manual Download Page 417

Page: 417 / 439

’07 HIGHLANDER_U (L/O 0608)

393

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

NOTICE

Be sure the engine and all accesso-
ries are off before performing main-

tenance.

When checking the battery, remove
the ground cable from the negative

terminal (“

−

” mark) first and rein-

stall it last.

Be careful not to cause a short cir-

cuit with tools.

Take care no solution gets into the

battery when washing it.

Type A

Green

Dark

Clear or

light yellow

Type B

Blue

White

Red

CHECKING  BY  INDICATOR
Check  the  battery  condition  by  the  indi-
cator  color.

Indicator color

Condition

Type A

Type B

Green

Blue

Good

Dark

White

Charging necessary.
Have battery

checked by your

Toyota dealer.

Clear or

light

yellow

Red

Have battery
checked by your

Toyota dealer.

During recharging, the battery is pro-

ducing hydrogen gas.

Therefore, before recharging:

1. If recharging with the battery installed

on the vehicle, be sure to disconnect
the ground cable.

2. Be sure the power switch on the re-

charger is off when connecting the
charger cables to the battery and when

disconnecting them.

CAUTION

Always charge the battery in an un-
confined area. Do not charge the

battery in a garage or closed room

where there is not sufficient ventila-
tion.

Only do a slow charge (5 A or

less). Charging at a quicker rate is
dangerous. The battery may ex-

plode, causing personal injuries.

NOTICE

Never recharge the battery while the
engine is running. Also, be sure all

accessories are turned off.

—Checking battery condition

Battery recharging precautions

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands