Toyota 2007 Highlander Owner'S Manual Download Page 367

Page: 367 / 439

’07 HIGHLANDER_U (L/O 0608)

343

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

CAUTION

Never get under the vehicle when

the vehicle is supported by the

jack alone.

7. Remove the wheel nuts and

change tires.

Lift the flat tire straight off and put it

aside.
Roll the spare wheel into position and

align the holes in the wheel with the

bolts. Then lift up the wheel and get

at least the top bolt started through

its hole. Wiggle the tire and press it

back over the other bolts.

Before putting on wheels, remove any

corrosion on the mounting surfaces

with a wire brush or such. Installation

of wheels without good metal

−

met-

al contact at the mounting surface can

cause wheel nuts to loosen and

eventually cause a wheel to come off

while driving.

—Changing wheels

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands