Toyota 2007 Highlander Owner'S Manual Download Page 219

Page: 219 / 439

’07 HIGHLANDER_U (L/O 0608)

195

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

1. “

” button

This button ejects a disc.

2. “SOURCE” button

This button turns on the rear seat en-

tertainment system and selects the

mode.

3. “TUNE/TRACK” button

This button seeks a radio station or
selects track/chapter.

4. “DISC/CH/PROG” button

This button skips directly to a desired

preset station, disc, track or chapter.

5. “CURSOR (REMOTE)” button

This button indicates the control
switches on the screen when the DVD

player is operated. This button also

can be used when you lose sight of
the controller.

6. Joystick

This joystick selects a control switch,

mode switch on the screen or the

menu for the disc.

Buttons on the DVD player unit

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands