Toyota 2007 Highlander Owner'S Manual Download Page 120

Page: 120 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Install the child restraint system on the

front passenger seat only when it is un-

avoidable. Your vehicle is equipped with a
front passenger occupant classification

system. In order to activate the occupant

classification system correctly, install the
forward

−

facing child restraint system on

the front passenger seat in the following

order:

1. Turn the ignition key to the “ON” posi-

tion.

2. Move the front passenger seat to the

rearward position.

3. Put the child restraint system on the

front passenger seat without putting

your weight on the front passenger

seat.

4. Insert the seat belt tab into the seat

belt buckle.

5. Fully extend the shoulder belt to put it

in the lock mode. When the belt is
then retracted even slightly, it cannot

be extended. To hold the seat securely,

make sure the belt is in the lock mode
before letting the belt retract.

6. While pressing the convertible seat

firmly against the seat cushion and

seatback, let the shoulder belt retract
as far as it will go to hold the convert-

ible seat securely.

CAUTION

Push and pull the child restraint sys-
tem in different directions to be sure

it is secure. Follow all the installation

instructions provided by its manufac-
turer.

7. Put a child on the child restraint sys-

tem and secure the child, complying
with the instructions provided by the

child restraint system manufacturer.

The “AIRBAG OFF” indicator light should

be illuminated when the ignition key is

“ON” and the child is in the child restraint
system after following these procedures.

The “AIRBAG OFF” indicator light indi-

cates the SRS front passenger airbag and
side airbag on the passenger side will not

deploy. If the “AIRBAG ON” indicator light

is illuminated, remove the child restraint
system and reinstall it with the ignition

key in the “ACC” or “LOCK” position. If

the “AIRBAG ON” indicator light is illumi-
nated when the ignition key is turned to

the “ON” position, then the SRS front pas-

senger airbag and side airbag on the pas-
senger side may deploy in an accident.

Do not drive the vehicle in this condition.

Remove the child restraint system and
contact your Toyota dealer.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands