Toyota 2007 Highlander Owner'S Manual Download Page 422

Page: 422 / 439

’07 HIGHLANDER_U (L/O 0608)

398

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

2. Pull the bulb out of the bulb base

and install a new bulb.

If the connector is tight, wiggle it.

3. Insert the bulb base into the mount-

ing hole by turning it clockwise.

Aiming is not necessary after replacing

the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.

If any of the following lights burns out,

contact your Toyota dealer.

Front fog lights

Front turn signals/parking and front

side marker lights

Rear side marker lights

NOTICE

Do not try to replace any of the light
bulbs mentioned above by yourself.

You may damage the vehicle.

—Front fog, front turn signal/

parking and front side marker,

and rear side marker lights

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands