Toyota 2007 Highlander Owner'S Manual Download Page 403

Page: 403 / 439

’07 HIGHLANDER_U (L/O 0608)

379

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

NOTICE

Be careful not to spill engine oil on
the vehicle components.

Avoid overfilling, or the engine

could be damaged.

Check the oil level on the dipstick

once again after adding the oil.

ENGINE OIL SELECTION

“Toyota Genuine Motor Oil” is used in

your Toyota vehicle. Use Toyota approved
“Toyota Genuine Motor Oil” or equivalent

to satisfy the following grade and

viscosity.
Oil grade:

ILSAC multigrade engine oil

Recommended viscosity:
2.4 L 4

−

cylinder (2AZ

−

FE) engine

SAE 5W

−

20 or 0W

−

Outside temperature

SAE 5W

−

20 or 0W

−

20 engine oil may be

used. However, SAE 0W

−

20 is the best

choice for good fuel economy and good
starting in cold weather.

3.3 L V6 (3MZ

−

FE) engine

SAE 5W

−

Outside temperature

SAE 5W

−

30 is the best choice for good

fuel economy and good starting in cold
weather.
If SAE 5W

−

30 is not available, SAE

10W

−

30 may be used. However, it

should be replaced with SAE 5W

−

30 at

the next oil change.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands