Toyota 2007 Highlander Owner'S Manual Download Page 180

Page: 180 / 439

’07 HIGHLANDER_U (L/O 0608)

156

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

In the following cases, contact your Toyota

dealer:

The warning light does not come on
after the ignition key is turned to “ON”.

The warning light remains on after the
ignition key is turned to “ON”.

The warning light comes on while driv-

ing.

The “TRAC OFF” indicator light will come

on when the “VSC” warning light comes
on even if the “TRAC OFF” switch is not

pushed.

The traction control system automatical-

ly helps prevent the spinning of 4

wheels when the vehicle is started or
accelerated on slippery road surfaces.

When the ignition key is turned to “ON”,

the system automatically turns on.

CAUTION

Under certain slippery road condi-
tions, full traction of the vehicle and

power against 4 wheels cannot be

maintained, even though the traction
control system is in operation. Do not

drive the vehicle under any speed or

maneuvering conditions which may
cause the vehicle to lose traction

control. In situations where the road

surface is covered with ice or snow,
your vehicle should be fitted with

snow tires or tire chains. Always

drive at an appropriate and cautious
speed for the present road condi-

tions.

NORMAL  DRIVING  MODE
Leave  the  system  on  during  the  ordi-
nary  driving  so  that  it  can  operate

when needed.

You may hear a sound in the engine

compartment for a few seconds when the

engine is started or just after the vehicle
begins to move. This means that the trac-

tion control system is in the self

−

check

mode, but does not indicate a malfunction.

Traction control system

(four

−

wheel drive models)

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands