Toyota 2007 Highlander Owner'S Manual Download Page 364

Page: 364 / 439

’07 HIGHLANDER_U (L/O 0608)

340

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

7. Pull out the spare tire and stand

it up against the bumper.

8. Remove the holding bracket.

Vehicles with aluminium wheels—

Remove the spare tire cover.

2. Block the wheel diagonally op-

posite the flat tire to keep the

vehicle from rolling when it is

jacked up.

When blocking the wheel, place a

wheel block in front of one of the front

wheels or behind one of the rear

wheels.

—Blocking the wheel

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Toyota 2007 Highlander, Owner'S Manual, Page: 364 / 439

Search results

Summary of Contents for 2007 Highlander

Reviews: