Toyota 2007 Highlander Owner'S Manual Download Page 233

Page: 233 / 439

’07 HIGHLANDER_U (L/O 0608)

209

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

To turn off the switches on the screen,

push the “CURSOR” button on the control-

ler once again or push the “Hide Buttons”
on the screen.

NOTE:

The playback condition of some

DVD video discs may be determined by

the DVD video software producer. This

DVD player plays discs as the software

producer intended. Therefore, some

functions may not work properly. Be

sure to read the instruction manual for

the DVD video disc separately provided.

For detailed information about DVD vid-

eo discs, see “—DVD video disc infor-

mation” on page 233 in this Section.
Precautions for DVD video discs

When recording on a DVD video, DVD

audio, video CD or audio tracks may not

record in some cases while the menu is
displayed. As audio will not play in this

case, verify that the video tracks are play-

ing and then activate playback.
The title/chapter number and playback

time display may not appear while playing
back certain DVD video discs.

CAUTION

Conversational speech on some DVDs
is recorded at a low volume to em-

phasize the impact of sound effects.

If you adjust the volume assuming
that the conversations represent the

maximum volume level available for

the DVD, you may be startled by
louder sound effects or when you

change to a different audio source.

Loud sounds may have a significant
impact on the human body or pose a

driving hazard. Keep this in mind

when you adjust the volume.

—DVD player operation

(DVD video/DVD audio)

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands