Toyota 2007 Highlander Owner'S Manual Download Page 85

Page: 85 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Two buckles and tabs for third seat

seat belt

The two tabs have different shape for its

end so that the belt is not buckled in the
wrong place.

Buckle 1—Properly matches with con-

cave end tab
Buckle 2—Properly matches with round

end tab

CAUTION

Make sure the both buckles are cor-
rectly located and securely latched.

Failure to properly match the buckle

and tab may cause severe injury in
case of an accident or a collision.

To release the concave end tab, insert the

key into the hole on buckle 1 and allow
the belt to retract.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands