Toyota 2007 Highlander Owner'S Manual Download Page 344

Page: 344 / 439

’07 HIGHLANDER_U (L/O 0608)

320

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Check the condition of the battery and

cables.

Cold temperatures reduce the capacity of
any battery, so it must be in top shape

to provide enough power for winter start-

ing. Section 7

−

3 tells you how to visually

inspect the battery. Your Toyota dealer

and most service stations will be pleased

to check the level of charge.

Make sure the engine oil viscosity is

suitable for the cold weather.

See page 378 in Section 7

−

2 for recom-

mended viscosity. Leaving a heavy sum-

mer oil in your vehicle during winter
months may cause harder starting. If you

are not sure about which oil to use, call

your Toyota dealer—they will be pleased
to help.

Keep the door locks from freezing.

Squirt lock de

−

icer or glycerine into the

locks to keep them from freezing.

Use a washer fluid containing an anti-

freeze solution.

This product is available at your Toyota

dealer and most auto parts stores. Follow

the manufacturer’s directions for how
much to mix with water.

NOTICE

Do not use engine antifreeze or any
other substitute because it may dam-

age your vehicle’s paint.

Do not use your parking brake when

there is a possibility it could freeze.

When parking, put the transmission into

“P” and block the rear wheels. Do not use
the parking brake, or snow or water accu-

mulated in and around the parking brake

mechanism may freeze, making it hard to
release.

Keep ice and snow from accumulating

under the fenders.

Ice and snow built up under your fenders

can make steering difficult. During bad
winter driving, stop and check under the

fenders occasionally.

Depending on where you are driving,
we recommend you carry some emer-

gency equipment.

Some of the things you might put in the

vehicle are tire chains, window scraper,

bag of sand or salt, flares, small shovel,
jumper cables, etc.

Your vehicle is not designed to be

dinghy towed (with four wheels on the
ground) behind a motorhome.

NOTICE

Do not tow your vehicle with four
wheels on the ground. This may

cause serious damage to your vehicle.

Dinghy towing

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands