Toyota 2007 Highlander Owner'S Manual Download Page 80

Page: 80 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Second and third seat head restraints—

When an occupant sits in the second or

third  seat,  always  raise  the  head  restraint
to  the  lock  position.
The  head  restraint  is  most  effective  when

it is close to your head. Therefore, using
a cushion on the seatback is not recom-

mended.

CAUTION

Adjust the center of the head re-
straint so that it is closest to the

top of your ears.

After adjusting the head restraint,
make sure it is locked in position.

Do not drive with the head re-
straints removed.

Front seats

Second seat

To use the armrest, pull it down as

shown in the illustrations.

NOTICE

To prevent damage to the armrest,
avoid putting heavy loads on it.

Armrests

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands