Toyota 2007 Highlander Owner'S Manual Download Page 187

Page: 187 / 439

’07 HIGHLANDER_U (L/O 0608)

163

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Type A

Type B

When parking, firmly apply the parking

brake to avoid inadvertent creeping.

To set: Fully depress the parking brake
pedal. For better holding power, first de-

press the brake pedal and hold it while

setting the parking brake.
To release: Depress the parking brake

pedal once again.
To remind you that the parking brake is

set, the parking brake reminder light in

the  instrument  panel  remains  on  until  you
release  the  parking  brake.
The  buzzer  will  remind  you  to  release  the

parking brake when the vehicle speed
rises above 5 km/h (3 mph) with the park-

ing brake is applied.

CAUTION

Before driving, be sure the parking
brake is fully released and the park-

ing brake reminder light is off.

The cruise control is designed to main-

tain a set cruising speed without requir-

ing the driver to operate the accelera-
tor. Cruising speed can be set to any

speed above 40 km/h (25 mph).

Within the limits of the engine’s capabili-
ties, cruising speed can be maintained up

or down grades. However, changes in ve-

hicle speed may occur on steeper grades.

CAUTION

To help maintain maximum control
of your vehicle, do not use the

cruise control when driving in

heavy or varying traffic, or on slip-
pery (rainy, icy or snow

−

covered) or

winding roads.

Avoid vehicle speed increases when
driving downhill. If the vehicle

speed is too fast in relation to the

cruise control set speed, cancel the
cruise control then downshift the

transmission to use engine braking

to slow down.

Parking brake

Cruise control

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands