Toshiba DP120F, Service Manual

Page: 67 / 706

March 2000 © TOSHIBA TEC 4-1 DP120F/DP125F Function Settings
Chapter 4 Function Settings
Function settings are mainly divided into two groups, function settings that can be performed by
the users, and function settings that can be performed by service technicians only. The con-
tents and operations are different between the two, so select the appropriate mode for each
required setting.
1. User Function Settings
The User Function Settings are used to set various requirements for the user at the time of
installing the machine and after the machine installation. The function setting is done by either
a menu-selection method or by setting the numeric value. It is possible to select any function by
pressing the [MENU] key, then the [
↑
] and [
↓
] keys, then [ENTER], or the numeric key for that
function. For the initial value list, refer to “Chapter 12 APPENDIX”.
<Remarks> To select a menu item, you may use the [
↑
] and [
↓
] keys to highlight the
required item followed by pressing the [ENTER] key, as described above,
or you may directly enter the item number through the numeric key.
<Remarks> If the first item is highlighted, the [
↑
] key will not have any effect. If the last
item is highlighted, the [
↓
] key will not return to the first item.
<Remarks> The keystrokes needed to access the various function settings will be shown
with uppercase letters and brackets. For example, [MENU] or [ENTER]
means to press the Menu Key or the Enter Key.