![background image](http://html.mh-extra.com/html/toshiba/dp120f/dp120f_service-manual_426825125.webp)
March 2000 © TOSHIBA TEC
4-59
DP120F/DP125F Function Settings
2. Service Settings in Test Mode
The Service Settings in Test Mode are to be operated by service technicians only. The unique
requirements of each user can be set. (When a PC Board is replaced, these settings must be
performed on the new PC board so that the same operations can be used. Therefore, output a
Function List, Dial Number List, etc. before starting Service Settings in Test Mode.)
Single use service mode operation:
NOTE:
When you enter the service mode using this procedure, the facsimile automati-
cally returns to the standby mode after each test is completed.
(1)
Press the following keys in order:
[MENU] [ * ] [#] [ * ] [ * ]
(2)
Use the [
↑
] or [
↓
] keys to select the “2.MAINTENANCE” item row, then press the
[ENTER] key, or press [2] on the dial key pad. The screen below is displayed.
05.ERR COUNTER SHIFT
06.EDGE REGISTRATION
07.DOC. TRANSMISSION
08.FUSER SETTING
01.MEMORY CLEAR
02.SET FUNCTION
03.MODEM WRITE
04.SET CONT. LEVEL
↓
→
MMM-DD-YY DDD HH:MM
RESIDUAL MEMORY 100%
1.FUNCTION TEST
2.MAINTENANCE
3.SERVICE LIST
Change to
service mode.
(3)
Use the [
↑
] or [
↓
] keys, or numeric keys, to select “02.SET FUNCTION” item row, then
press the [ENTER] key.
←
Displays the numeric value currently set (cannot be changed).
←
Displays the numeric value to be entered now (can only be
altered at the point of the blinking cursor).
SET FUNCTION
FUNC0 =XXXXXXXX
XXXXXXXX
↑
↑
Bit 7
Bit 0
Bit 7 is the left most digit as shown on the LCD display. By entering 1 or 0 in the bit
corresponding to the desired function, you can change the setting of that function. Press
the [ENTER] key to store the new setting and advance to the next function.
NOTE:
Use the [ENTER] key to advance to the next function. Use the [>] key to
move to the next bit. Use the [<] key to move to the previous bit, if already
at bit 7 (the left digit), the [<] key will move to the previous function.
Summary of Contents for DP120F
