Toshiba DP120F, Service Manual

Page: 108 / 706

DP120F/DP125F Function Settings 4-42 March 2000 © TOSHIBA TEC
1.4.8 RX Multi Copy [MENU], [4], [3], [08]
This is to set, on the receiving station, the number of copies of received documents.
(1) Enter the desired number of copies, then press the [ENTER] key.
COPY NUMBER
Up to 99 copies for one received document can be entered.
<Remarks> • When COPY NUMBER is 9 or less, enter two digits by adding a 0 (zero)
before the number.
• When more than 1 is set here, the setting will be effective to make all re-
ceptions thereafter in Memory Reception mode.
• The Collated Print function can be set together with the Receive Multi Copy
function. In this case, data is printed out from the last page to the first page.
• When the residual memory capacity is not enough, this setting will be de-
activated and the normal reception mode will be regained.
• When there is no more residual memory capacity remaining during a re-
ception in Memory Reception mode, the setting of the Receive Multi Copy
is disregarded and recording will occur in the ordinary recording procedure
with the Page 1 printed first.
(2) After the message “OPERATION COMPLETED” is displayed, press the [STOP] key to
return to the Standby Mode screen.
RX MULTI COPY
COPY NUMBER =(01-99)
01