March 2000 © TOSHIBA TEC
8-3
DP120F/DP125F Removal/Replacement
2.1.2 Operation Panel Assembly
Before disassembling or reassembling, be sure to refer to “1. Before Disassembling or Reas-
sembling.”
(1)
Open the top cover.
(2)
Remove the three screws from the operation panel assembly, and remove the operation
panel assembly.
Fig. 8-2-2
(3)
Disconnect the connector from CN1 on the operation panel PBA.
Fig. 8-2-3
(4)
Reassemble the components in the reverse order of disassembly.
NOTE:
After reassembling, perform the operation panel test referring to the "Chap-
ter 11:1.5.1 OPE. PANEL TEST" on page 11-16.
08-02-02
08-02-03
Operation panel assembly
Operation
panel PBA
Connector
CN1
Summary of Contents for DP120F
