Toshiba DP120F, Service Manual

Page: 111 / 706

March 2000 © TOSHIBA TEC 4-45 DP120F/DP125F Function Settings
1.5.2 Comm. Report Options [MENU], [4], [4], [02]
This sets the output method of Communication Reports and also sets whether the document
content is printed to the reports for Memory Transmissions.
The following are reports and lists that can be output as communication reports.
• Single Transmission
• Single Memory Transmission
• Multi-address Transmission
• Multi-polling
• Relay/Relay-Relay Transmission (Originator)
• Relay/Relay-Relay Transmission (Relay Station)
• Relay/Relay-Relay Transmission (End Terminal)
(1) The screen below is displayed to select options for Single Transmission. Use the [
↑
] or
[
↓
] keys to select the desired option (ALWAYS, ON ERROR, or OFF), then press the
[ENTER] key.
ALWAYS
Prints after every transmission.
ON ERROR
Prints only when an error has occurred in transmission.
OFF
Disables “print.”
(2) The screen below is displayed to select options for Single Transmission. Use the [
↑
] or
[
↓
] keys to select the desired option, then press the [ENTER] key.
SET TX REPORT
1.ALWAYS
2.ON ERROR
3.OFF
ON
To reduce the report size and print on the A5 size paper.
OFF
To print the report normally.
A5 SIZE PRINT
1.ON
2.OFF