Toshiba DP120F, Service Manual

Page: 4 / 706

DP120F/DP125F Introduction 1-2 March 2000 © TOSHIBA TEC
Recording paper tray(s):
A 550-sheet tray, A4 or adjustable to Letter or Legal, is installed as a standard feature. 1 or 2
optional recording paper tray can be added to enable automatic paper feeding with a maximum
of three recording paper trays. All recording paper trays use a convenient front loading design.
Maximum recording paper capacity is 1650 sheets using the three paper trays.
Image (PIX) memory communication function:
Picture data can be stored in the image (PIX) memory. For a delayed transmission, the picture
data created by scanning documents is stored in the image memory and to be transmitted at the
designated time. Other memory functions include multi-address transmission, substitute re-
ception, ECM communication, etc.
The memory contents will be retained by a backup battery for up to 10 hours if a power failure
occurs. The DP120F has a standard memory of 3 MB, which can be upgraded by installing one
4 MB optional memory PBA. Both models have a maximum memory capacity of 7 MB.
73 one touch keys:
The remote party’s address data can be registered to a one touch key. Communication options
can be registered for each address. Some one touch keys also operate as direct function
access keys. For further details, see page 1-13.
300 abbreviated dial numbers:
300 abbreviated dial numbers can be assigned in the range from No. 001 to 999.
Alternate number dialing:
It is possible to assign two facsimile telephone numbers to one abbreviated dial number or one
touch dial key (one as the primary telephone number and the other as an alternate telephone
number). The facsimile first dials the primary telephone number, then redials if the line is busy
until the redialing limit count is reached. It will then begin to dial the alternate number. (Except
for Relay/Mailbox/Confidential/Polling)
Multi-address transmission function:
Transmissions of the same document to multiple addresses (up to 373 addresses) are possible
using one operation sequence, in which preset abbreviated dial numbers (300), and one touch
dial keys (73) can be used. When the multi-key is specified, key pad dialing of up to 1000
digits, or 100 locations, is also possible.
Multi-polling reception:
Polling receptions from multiple remote parties (up to 373 parties) are possible using one opera-
tion sequence, in which preset abbreviated dial numbers (300), and one touch dial keys (73)
can be used. When the multi-key is specified, key pad dialing of up to 1000 digits, or 100
locations, is also possible.