Toshiba DP120F, Service Manual

Page: 91 / 706

March 2000 © TOSHIBA TEC 4-25 DP120F/DP125F Function Settings
1.2.19 Line-2 Mode [MENU], [4], [1], [16]
This setting is performed when the optional NCU PC Board is installed to use Line 2.
(1) Use the [
↑
] or [
↓
] keys to select the desired option (TX/RX, RECEPTION ONLY, or
TIMER), then press the [ENTER] key.
TX/RX
To use Line 2 for both transmission and reception
RECEPTION ONLY
To use Line 2 always for reception only.
TIMER
To use Line 2 for reception only for a timer period designated.
When “TIMER” is selected, the following screen appears. Use the [
←
] or [
→
] keys to
move the cursor to the desired digit, enter a desired value, or alternate AM/PM position.
When the desired time period is displayed, press the [ENTER] key.
LINE-2 MODE
1.TX & RX
2.RECEPTION ONLY
3.TIMER
RECEPTION ONLY
TIME PERIOD =
00:00 - 00:00
(2) After the message “OPERATION COMPLETED” is displayed, press the [STOP] key to
return the display to the Standby Mode screen.