DP120F/DP125F Troubleshooting
11-22
March 2000 © TOSHIBA TEC
1.5.5 SRAM TEST
[MENU], [9], [4], [05]
This test conducts a read/write test on all the areas of the SRAM.
(1)
Use the [
↑
] or [
↓
] key to select the "05. SRAM TEST", and then press the [ENTER] key.
<Remarks>
If a memory error occurs, the address where the error occurred is dis-
played and the procedure is suspended. The test will resume upon press-
ing the [START] key.
<Remarks>
The address assigned to each memory is as in the table below.
When an error occurs, refer to this table.
(2)
When you complete the test, press the [STOP] key to return to the standby mode screen.
(3)
Depending on the result of the test, replace the Main PBA referring to "Chapter 8: Re-
moval/Replacement/Adjustment" on page 8-46.
→
SRAM TEST
TESTING
On completing all the
addresses normally
SRAM TEST
OK
→
SRAM TEST
NG
ADDRESS=
YYYYYYH
If no further errors are
found after resuming
SRAM TEST
NG
COMPLETED
Address (H)
IC No.
Installed PBA
F00000 to F7FFFF
IC30, IC31
Main PBA
Summary of Contents for DP120F
