Toshiba DP120F, Service Manual

Page: 467 / 706

March 2000 © TOSHIBA TEC 8-47 DP120F/DP125F Removal/Replacement
01/12
(10) Reassemble the components in the reverse order of disassembly.
CAUTION: • There is a danger of a component explosion, if the battery is incor-
rectly replaced. Replace only with the same or equivalent type recom-
mended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions.
NOTES: • Carefully handle the boards that are directly connected together to avoid
damaging the connectors and boards.
• After reassembling, turn the power switch ON, and execute and confirm
the following:
- Perform the memory clear (ALL) referring to the “Chapter 11:1.6.1
MEMORY CLEAR” on page 11-27.
- Set the country/region where the machine is used referring to the “3.4
Country/Region Setting” on page 8-135.
- According to the pre-output lists of the registration and programming,
set the function again.
- Perform the edge registration adjustment referring to the “3.3 Edge Reg-
istration” on page 8-134.
- Set the fuser rank referring to the “3.2 Fuser Temperature Settings” on
page 8-133.
- Reset all counter data in the memory write mode using the hex data
provided on the communication journal referring to the “Chapter 11:1.6.3
MEMORY WRITE” on page 11-30.
SCAN COUNT : F052EA — F052ED
PRINT COUNT : F052F2 — F052F5
DRUM COUNT : F0534E — F05351