Toshiba DP120F, Service Manual

Page: 89 / 706

March 2000 © TOSHIBA TEC 4-23 DP120F/DP125F Function Settings
1.2.17 Redial Mode [MENU], [4], [1], [14]
This setting is performed to select the automatic redial interval and specify the number redial
attempts to be made when communication is not completed properly because the line is busy or
a communication error occurs.
(1) Use the [
↑
] or [
↓
] keys to select one of the two options (INTERVAL and COUNTER),
then press the [ENTER] key.
When “01.INTERVAL” is selected, the screen below is displayed. Enter a value from 01 to
15 (in units of minutes) as the redial interval, then press the [ENTER] key.
<Remarks> When any value outside the specified range is entered, it must be set again.
When “02.COUNTER” is selected, the screen below is displayed. Enter 00 to 14 as the
counter value, then press the [ENTER] key. When “0” is entered, no redialing will occur.
<Remarks> When any value outside the specified range is entered, it must be set again.
REDIAL MODE
01.INTERVAL
02.COUNTER
REDIAL MODE
INTERVAL =(01-15MIN)
01
REDIAL MODE
COUNTER =(00-14)
02
(2) After the “OPERATION COMPLETED” message is displayed, press the [STOP] key to
return to the Standby Mode screen.