Toshiba DP120F, Service Manual

Page: 617 / 706

March 2000 © TOSHIBA TEC 11-5 DP120F/DP125F Troubleshooting
(2) Load the documents in the document tray and press the [START] key. The documents will
be transported one by one and the number of documents unloaded will be displayed at the
lower right on the screen.
After transporting all
the documents
<Remarks> If a document jam occurs during transport, the screen below is displayed.
Remove the jammed documents. You can resume the test by pressing the
[START] key.
ADF TEST
PAGES 001
ADF TEST
START TO RESTART OR
STOP TO COMPLETE
PAGES XXX
→
(3) To end the test, press the [STOP] key.
ADF TEST
DOCUMENT JAM
PAGES XXX
ADF TEST
PAGE NUMBER CORRECT?
1.YES
2.NO
(4) Use the [
↑
] or [
↓
] key to select “1.YES” or “2.NO”, and then press the [ENTER] key.
If the number of documents loaded is consistent with the number of documents unload,
select “1.YES.” If a document is not unloaded even once, select “2.NO.”
(5) The "OPERATION COMPLETED" message is displayed and the unit returns to the test
item select screen of the INDIVIDUAL TEST.
<Remarks> The result of the ADF TEST can be checked with the self test report. For
printing the self test report, refer to “1.3 TEST RESULT LIST” on page 11-
14.
If the result of the ADF TEST is judged to be NG, replace the ADF pad
assembly and Pinch rollers by referring to “Chapter 8 Removal/Replace-
ment/Adjustment” on pages 8-21 and 8-24.