Toshiba DP120F, Service Manual

Page: 203 / 706

March 2000 © TOSHIBA TEC 4-137 DP120F/DP125F Function Settings
<Remarks>
UAD 2 Bit 7 to 5:
Sets the range of the dial tone frequency that should be detected when calling through
a PABX.
UAD 2 Bit 4 to 2:
Sets the time when the dial tone is recognized when calling through a PABX. When
a dial tone is continuously detected for the time specified in this setting, the facsimile
regards the line as being connected.
UAD 2 Bit 1 and 0:
Set the allowable gap during line current detection when calling through a PABX. In
line current detection, even if there are gaps within the time specified in this setting,
the counter is not reset and continues to count the duration of line current detection
after the current is re-detected.
Default table
US TYPE EUR TYPE
BIT US TW SG HK DE GB IT BE NL FI ES AT CH SE DK NO PT FR AU
7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 0
2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0
0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0