Toshiba DP120F, Service Manual

Page: 85 / 706

March 2000 © TOSHIBA TEC 4-19 DP120F/DP125F Function Settings
1.2.12 Receive Interval [MENU], [4], [1], [09]
This function insures there will be a period of time set aside to receive incoming facsimiles
during periods of heavy outgoing transmission activity. After every fourth consecutive trans-
mission, this machine will wait 0 to 15 minutes to allow incoming facsimiles to be received
(default is 3 minutes).
(1) Enter the INTERVAL value and press the [ENTER] key.
INTERVAL
Set the value in the range from 0 to 15.
(2) After the “OPERATION COMPLETED” message is displayed, press the [STOP] key to
return to the Standby Mode screen.
1.2.13 ECM (Error Correction Mode) [MENU], [4], [1], [10]
This is to set whether the Error Correction Mode (ECM) which automatically corrects image
data affected by line noise or distortion is to be activated or not.
(1) Use the [
↑
] or [
↓
] keys to select the desired option (ON or OFF), then press the
[ENTER] key.
RECEIVE INTERVAL
INTERVAL=(0-15 MIN)
3
SET ECM
1.ON
2.OFF
ON
To activate the ECM function.
OFF
To deactivate the ECM function. In this case, part of the ECM buffer is available to be
used as image (PIX) memory.
(2) After the “OPERATION COMPLETED” message is displayed, press the [STOP] key to
return to the Standby Mode.