Terumo CAPIOX EBS Circuit with X coating, Instructions For Use Manual

Page: 109 / 177

Other Operation Procedures
Refer to the table below for an explanation of each item.
Item Overview Description Remark
Data start Indicates the data start. Year/month/
day/hour/
minute/second,
sequence
number, MAC
address AD four digits for year, 01 to 12 for month, 01 to 31 for day,
00 to 23: 24-hour clock for hours, 00 to 59 for minutes,
00 to 59 for seconds, and a built-in clock of the Controller is
used as a calendar.
The sequence number is cycled by taking numerical numbers
between 0000000000 to 4294967295, and 0 suppression is
not performed.
MAC addresses are characteristic numbers of the Controller.
Flow value Indicates flow values. Flow value,
unit The flow value is from -9.99 to 9.99 or NG, the last number
0 is not omitted, and when the flow is NG, an invalid value is
indicated.
The unit is LPM (L/min).
Pressure 1 ch Indicates pressure value
1 ch. Pressure
value, unit The pressure value is from -250 to 900 (mmHg), from -33.3
to 120.0 (kPa), or NG, and the value is zero-suppressed, and
when NG, an invalid value is indicated.
The unit is mmHg or kPa.
Pressure 2 ch Indicates pressure value
2 ch.
Temperature
1 ch Indicates temperature value
1 ch. Temperature
value, unit The temperature value is from 0.0 to 50.0 or NG, the value is
zero-suppressed, the last number 0 is not omitted, and when
the temperature value is NG, an invalid value is indicated.
The unit is deg C.
Temperature
2 ch Indicates temperature value
2 ch.
Motor speed Indicates motor speed. Motor speed,
unit The motor speed is from -9999 to 9999 or NG, the value is
zero-suppressed, and when the motor speed is NG, an invalid
value is indicated.
Alarm Indicates alarms. Alarm status Indicates an alarm occurrence status of 192 bits.
Data end Indicates the data end.
80