This product is a kit consisting of cannulas to connect to a blood circuit for extracorporeal circulation to send or drain blood after
percutaneously inserting cannulas into blood vessels and supporting tools for catheterization.
This product is composed of one cannula, one dilator, one entry needle, one guide wire, predilators (8 Fr., 12 Fr.), one syringe and one
scalpel.
X coating is coated at the contact surface of the cannula with blood.
Arterial cannula
■
Cannula
¡Lock connector type
Dilator hub
(Fr. Color code)
<Dilator>
Dilator tube
Screw ring (red)
<Cannula>
Cannula tube
Clamping tube
Connector
■
Introducer set
Predilator (8Fr., Gray)
Guide wire
(for arterial cannula)
Syringe
Entry
needle
Scalpel
Holder hub
Predilator (12Fr., White)
Scalpel
¡Do not use any metal sheath.
Pulling the guide wire by using a metal sheath or forwarding a metal sheath while the guide wire is indwelled may
cause fracture of the guide wire and desquamation of plastic parts, which may require withdrawal.
¡
Though X coating is coated at the contact surface of the cannula with blood, appropriate heparinization
should be performed to avoid blood coagulation.
¡The guide wire develops its lubricity only when the surface is wet. Wet the surface of the guide wire before
handling by filling the holder with heparinized saline in advance.
¡This device should only be used by properly trained and qualified personnel.
¡This product is sterilized by ehylene oxide and is intended for single use only. Do not resterilize nor reuse.
¡Do not use if the unit package or the product has been damaged or soiled. Use immediately after opening the unit
package and dispose of safely after single use to avoid risk of infection.
¡Do not use any organic solvent such as alcohol and ether with this product. Plastic parts composing this product
may be damaged due to these solvents.
¡All procedures must be aseptically performed.
Warnings and Precautions
Product overview/Name of each part
Venous cannula
■
Cannula
¡Lock connector type
<Dilator>
Dilator hub
(Fr. Color code)
Dilator tube
Screw ring (blue)
<Cannula>
Cannula tube
Clamping tube
Connector
■
Introducer set
Predilator (8Fr., Gray)
Guide wire
(for venous cannula)
Syringe
Entry
needle
Predilator (12Fr., White)
Holder hub
Scalpel
¡3/8” straight connector type
<Dilator>
Dilator tube Connection tube (blue
•
red)
Dilator hub
(Fr. Color code)
<Cannula>
Cannula connector
Cannula tube
Clamping tube Connector
PRECAUTIONS
WARNINGS
er
LX
SX
LX
SX
LX
SX
er
LX
SX
LX
SX
LX
SX
Scalpel
Summary of Contents for CAPIOX EBS Circuit with X coating
