Terumo CAPIOX EBS Circuit with X coating, Instructions For Use Manual

Page: 130 / 177

Various menu settings
5. Tap [OK] after confirming the message displayed.
(Figure 3-65)
The password is changed.
Figure 3-65
Tap the icon of the menu you want to set, and then the Admin Setup screen opens.
Check the corresponding item for the setup method of each menu.
Icon name Function Factory setting Remark
Reference
page
Flow
Preset Sets the admin setting of the
Flow Alarm threshold. Alarm upper limit: 7.0 LPM (L/min)
Alarm lower limit: 0.5 LPM (L/min) The setting will take
effect after restarting.* page 102
Pressure
Preset Sets the on/off status of the
pressure measuring function
and the admin setting of the
threshold for the Pressure
alarm and Pressure Alert for
every channel.
The display unit can also be
set.
Alarm upper limit: 360 mmHg
Alert upper limit: 300 mmHg
Alert lower limit: 70 mmHg
Alarm lower limit: 50 mmHg
The setting will take
effect after restarting.* page 103
On/Off: On
mmHg/kPa: mmHg The setting will take
effect instantly.
Temperature
Preset Sets the on/off status of
the temperature measuring
function and the admin
setting of the threshold value
for the Temperature Alert for
every channel.
Upper limit temperature: 42.0°C
Lower limit temperature: 30.0°C
The setting will take
effect after restarting.*
page 104
On/Off: On
Fast
clamp Sets the on/off status for the
admin setting of the Fast
Clamp. On/Off: Off The setting will take
effect after restarting.* page 104
Air Bubble Sets the on/off status of the
air bubble detector function
and the admin setting of the
detection sensitivity. On/Off: On The setting will take
effect after restarting.* page 104
Detection sensitivity (High/
Medium/Low): Low The setting will take
effect instantly.
101
Admin Setup Screen