Terumo CAPIOX EBS Circuit with X coating, Instructions For Use Manual

Page: 159 / 177

Maintenance and Inspections
Serial number: Date: / / Person in charge:
Check items
Inspection before circulation starts (Before each use)
Inspection of the
motor drive (Before
each use) • Are there any abnormalities such as liquid leakage or rotation deflection of the
centrifugal pump or abnormal sounds from the Drive Motor while the blood outlet line
of the centrifugal pump is clamped and the centrifugal pump is rotated at a speed of
3000 RPM for approximately 30 seconds?
• Does the centrifugal pump stop when the motor speed is changed to 0 RPM?
Pass
Pass
Fail
Fail
Inspection of the ABD/
Flow Sensor (Before
each use)
• Is the flow displayed in the flow indicator in the LCD when the centrifugal pump is
rotated?
Pass Fail
Inspection of the Fast
Clamp (Before each
use) • Is the plunger closed (up position) after the Fast Clamp is operated by tapping the
[Clamp]?
• Does the lever return to the original position after pulling it up until you hear a click? If
not, does the lever return to the original position when it is pulled down?
Pass
Pass
Fail
Fail
Overall judgement
(If any one item is judged as fail, repairs are necessary. Immediately stop using the system and contact
Terumo’s service representative.)
Pass Fail
Remarks:
Serial number: Date: / / Person in charge:
Check items
Six-month inspection (Once every six months)
Inspection of the
battery (Once every
six months) • Is there more than 70% battery charge level when the battery is charged until the
charge lamp turns off?
• Can the system operate for more than three hours on battery power with the motor
speed set at 3000 RPM?
• Does the charge lamp turn off within six hours when charging starts after the power is
turned off?
Pass
Pass
Pass
Fail
Fail
Fail
Overall judgement
(If any one item is judged as fail, repairs are necessary. Immediately stop using the system and contact
Terumo’s service representative.)
Pass Fail
Remarks:
130