Terumo CAPIOX EBS Circuit with X coating, Instructions For Use Manual

Page: 47 / 177

Parts Description

Related components
• CAPIOX centrifugal pump
• CAPIOX EBS Circuit with X coating
• CAPIOX Luer Thermistor
• CDI System 500
• Pressure sensor (complied with ANSI/AAMI BP22:1994) * Limited to those that can be connected to connectors.
18
• Do not use this system with any equipment other than the dedicated medical equipment. If equipment other than the
dedicated medical equipment is used, this may result in decreased performance.
• Do not attach the ABD/Flow Sensor and the Fast Clamp to any tube other than the dedicated tube (internal diameter:
9.5 mm (3/8 inches)). If a tube other than the dedicated tube is used, this may result in decreased performance.
• Do not use any cable other than the included AC power cable. Otherwise an electric shock or short circuit may occur
resulting in failure of this system.
• Make sure to use a pressure sensor which conforms to ANSI/AAMI BP22:1994. If a pressure sensor that does not conform
to the aforementioned standard is used, this may result in decreased performance.
• Before use, check the instructions for use of the medical supplies and medical equipment that are used in combination.
• Use the following dedicated devices for this system. Drive Motor (Catalogue No.: ME
*
SP200M), Hand Crank (Catalogue
No.: XX
*
SP05), ABD/Flow Sensor (Catalogue No.: ME
*
SPFAS01, ME
*
SPFAS02), Temperature Sensor Cable (Catalogue
No.: XX
*
SPCBL011, XX
*
SPCBL012), Pressure Sensor Cable (Catalogue No.: XX
*
SPCBL021), Fast Clamp (Catalogue
No.: ME * SPCLP01), CDI Communication Cable (Catalogue No.: XX * SPCBL031), Cart (Catalogue No.: XX * SPCRT01),
Fast Clamp Attachment (for EBS) (Catalogue No.: XX * SPCLP01), Fast Clamp Arm (Catalogue No.: XX * SPCLP02). If other
devices are used, this may result in decreased performance. In addition, influence may be given to the emission level of
electromagnetic wave and the tolerance of this system.
Cautions